Table of Contents
Advertisement
t
y
u
i
o
!0
!1
!2
t Feed Dog
Turn this option on if you wish to sew decorative stitches
and sewing applications with the feed dog down.
Press the drop feed key to turn on this option.
y Upper Thread Breakage Sensor
If you want to turn off the auto-stop function when the
upper thread (needle thread) breaks, turn off the upper
thread breakage sensor.
u Bobbin Thread Remaining Sensor
If you want to turn off the auto-stop function when
the bobbin thread runs out, turn off the bobbin thread
remaining sensor.
Press the next page key to show the next menu.
i Foot Height for Pivoting
When the foot up option is turned on, the presser foot will
automatically go up when the machine stops.
The height of the foot in the up position can be adjusted
by pressing the "+" key or "–" key in accordance with
thickness of the fabrics.
o Adjustable Start-Up Speed
The machine will start running slowly and the sewing
speed will gradually increase to maximum. You can select
the desired start-up speed from slow, medium or high by
pressing the corresponding key, and set the speed for the
start/stop button or foot control individually.
Press the next page key to show the next menu.
!0 Variable zigzag sensitivity
You can adjust the amount of needle swing against
the knee lifter movement for variable zigzag in sewing
applications.
Press the "–" key so the needle swings a small amount
when moving the knee lifter.
Press the "+" key so the needle swings a large amount
when moving the knee lifter.
!1 Favorite Stitch Adjustment
If you wish to save the changes to manual stitch settings,
turn on this option by pressing the ON key.
If this option if turned off, the manual stitch setting will be
cleared when turn the power switch off.
Press the delete icon
setting.
NOTE:
This option is available for all stitches except
monogram.
!2 Resume Mode
Turn on this option when you wish to resume the last
pattern sewn before turning the power switch off.
When the power is turned on again, the confirmation
message will appear. Press the OK key to resume the
last pattern.
129
to clear the manual stitch
Advertisement
Table of Contents
