Table of Contents
Advertisement
w
q
Machine Operating Buttons
q Start/stop button
Press this button to start or stop the machine.
The machine starts running slowly for the first few
stitches, it then runs at the speed set by the speed
control slider. The machine runs slowly as long as this
button is pressed.
The button will turn red when the machine is running, and
green when it has been stopped.
Pressing and holding this button while sewing will slow
down the sewing speed and the machine will stop when
the button is released.
NOTE:
• The start/stop button cannot be used when the foot
control is connected to the machine.
• You can select the desired start-up speed from
slow, medium or high (refer to page 129).
w Reverse button
• When the following stitch patterns are selected;
Applique
Utility
1
4
9
10
11
12
The machine will sew in reverse as long as the
reverse button is pressed. Release the button to sew
forward.
When the machine is stopped and foot control is
disconnected, the machine will sew in reverse slowly
as long as the reverse button is pressed.
Release the button to stop the machine.
• When the following stitch patterns are selected;
Utility
2
3
There will be particular functions of the reverse button
when the patterns shown above are selected. Refer to
pages 40, 59-60, 65 and 113 for instructions.
• When any other stitches are selected;
If you press the reverse button when sewing any other
patterns, the machine will immediately sew locking
stitches and automatically stop.
14
Quilt
Bridge
10
1
2
3
3
1
1
2
3
Buttonhole
2
3
2
15
16
4
5
6
Advertisement
Table of Contents
