Table of Contents
Advertisement
q
q
e
r
q
t
y
r
w
e
r
w
t
e
w
u
Clasp Stitch
q Pattern:
w Presser foot:
e Thread tension:
r Foot pressure:
You can close quilt layers and using the clasp stitch.
Select stitch 098 in mode 2.
Press the memory key.
Select stitch 202 in mode 2 (L.S
Press the memory key.
Start sewing.
The machine sews clasp stitch and locking stitch then
stops automatically.
Free Motion Quilting (1)
q Pattern:
w Presser foot:
e Thread tension:
r Foot pressure:
t Feed dog:
* Select pattern 1 when using clear view foot.
CAUTION:
Do not move the quilt layers toward you when the
open-toe foot is attached.
Attaching the convertible free motion quilting foot
Attach the needle plate for straight stitch (refer to page
26).
Loosen the setscrew and remove the foot holder.
Attach the convertible free motion quilting foot to the
presser bar and tighten the setscrew firmly with the
screwdriver.
Place the fabric under the foot.
Adjust the height of the foot by turning the round nut until
bottom of the foot barely touches top of the fabric.
q Setscrew
w Presser bar
e Round nut
Changing the foot
This foot comes with the closed-toe foot attached,
however, it is convertible to the open-toe foot and clear
view foot.
To change the foot, raise the foot and turn the round nut
to bring the foot to the lowest position.
Remove the setscrew and remove the closed-toe foot.
Attach the desired foot and secure it with the setscrew.
Adjust the height of the foot (see above).
r Setscrew
t Closed-toe foot
y Open-toe foot
u Clear view foot
77
MODE 2: 098 or 099
Satin stitch foot F
3-6
2-3
).
SS plate: 4*
Convertible free motion quilting
foot QB-S
2-6
3
Lowered
Advertisement
Chapters
Table of Contents
