Sanyo VCC-XZ600P Instruction Manual page 74

Hide thumbs Also See for VCC-XZ600P:

All the setting options on the menu on this camera have already been configured to a standard value as default

setting.

The description and example in the following sections assume typical usage.

You can change or adjust the settings or values as necessary.

Changing the display language on the menu screens (LANGUAGE)

Masking certain part of the image for protecting privacy (PRIVACY MASK)

Reversing the live image (OPTION → MIRROR)

Setting and displaying camera name to easily identify the camera from which the live image is sent

(OPTION → DISPLAY → TITLE)

Changing the zooming speed (LENS → ZOOM)

Increasing the magnification power in zooming (LENS → ZOOM)

Detecting intruders (CAMERA → MOTION)

Zooming in the object automatically when an alarm is detected (ALARM → ALARM IN)

Notifying users of alarm detection on the monitor (ALARM → ALARM DISPLAY)

Reducing detection errors of the motion sensor (CAMERA → MOTION)

When the object is out of focus (LENS → FOCUS)

When the object is too bright

When the object is dark

When the object is hard to see in the backlight condition (CAMERA → BLC)

When proper white balance adjustment cannot be made (CAMERA → WHITE BALANCE)

Recording fast-moving object (CAMERA → SHUTTER → SHORT)

Emphasizing the profile of the object (CAMERA → APERTURE)

Adjusting the brightness or contrast level of the entire image (CAMERA → GAMMA)

When the camera reacts to slight movements of the object (LENS → FOCUS)

Burst occurs when the image viewing mode is switched between the color and black/white video modes

(CAMERA → DAY/NIGHT)

Connecting multiple cameras

Operating the camera in the RS-485 or coaxial superimposed communication mode

Connecting the camera to an external door switch or infrared sensor (ALARM → ALARM IN)

Using an external buzzer or lamp as an alarm notification device (ALARM → ALARM OUT)

Switching automatically between color and monochrome modes according to the luminance change

(CAMERA → DAY/NIGHT)

Changing the monitoring condition according to the installation environment of the camera (CAMERA)

Restricting the menu operations to specific users for security reasons (PASSWORD → PASSWORD

LOCK)

74 / 100