Sanyo VCC-XZ600P Instruction Manual page 60

1
Use the / button to select [PASSWORD] in the main menu, and press the SET button.
The PASSWORD screen appears.
2
Use the / button to select [PASSWORD LOCK], and press the SET button with "OFF ↓"
displayed.
The password entry screen appears.
3
Use the / button to select the digit and use the
Repeat this procedure until the whole password value (ex. 1234) is entered, and press the SET
button.
When a valid password is entered, "OK" appears.
When a wrong password is entered, "NG" appears.
If you enter wrong passwords three consecutive times, the password entry field disappears.
4
Press the SET button again.
This completes the password lock setting, and the PASSWORD screen appears again.
While the password lock is enabled, "ON" is displayed for [PASSWORD LOCK].
5
Select [MENU] and choose "BACK" or "END" to complete the setting.
/ button to select a number for the digit.
60 / 100