Osd Functions; To Use The Osd Menu; To Select Input Source; Osd Menu In Av/Tv Mode - ViewSonic N4290p User Manual

OSD function

To Use the OSD Menu

All the functions for the LCD TV are control either by the remote control or the control button on
the front control screen at bottom of right side.
1. Press the Menu button to display or exit the OSD main menu.
2. Use the Up or Down buttons to select the function to be adjusted. The function where
the cursor is located is the selected one.
3. Use the Left or Right buttons to enter into the submenu, or to enable or adjust the
selected function. The function where the cursor is located is the one that can be
adjusted.
4. Press the Exit button to exit the OSD menu.

To Select Input Source

In different input source, the functions can be adjusted are different.
Press Source key to select the input source. It offers the following input source: TV, AV1, AV2,
S-Video1, S-Video 2, YPBPR, HDMI1, HDMI2 & VGA.

OSD Menu in AV/TV Mode

Press the MENU button on the remote control to display the OSD main menu. It offers the
following options: Picture Setting, Sound Setting, Setup Setting & TV Setting.
Refer to the following descriptions for details:
(note: In different input source, the functions which can be adjusted are different.)
ViewSonic 14 N3290w/N4290p/N4790p