Daily Use - Zanussi ZANZDLN2521 User Manual

DAILY USE

1. Open the water tap.
2. Press and hold
activated.
3. Fill the salt container if it is empty.
4. Fill the rinse aid dispenser if it is empty.
5. Load the baskets.
6. Add the detergent.
7. Select and start a programme.
8. Close the water tap when the programme is
complete.
USING THE DETERGENT
A B
1. Press the release button (B) to open the lid (C).
2. Put the detergent, in powder or tablets, in the
compartment (A).
3. If the programme has a prewash phase, put a
small quantity of detergent on the inner part of
the appliance door.
4. Close the lid. Make sure that the release button
locks into position.
For information about the detergent
dosage, refer to the manufacturer's
instructions on the packaging of the
product. Usually, 20 - 25 ml of gel
detergent is adequate for washing a
load with normal soil.
Do not fill the compartment (A) with
more than 30 ml of gel detergent.
HOW TO SELECT AND START A
PROGRAMME
1. Press the button dedicated to the programme
you want to set.
The light related to the button flashes.
2. Activate Extra Power if desired.
3. Close the appliance door to start the
programme.
12
until the appliance is
C
HOW TO SELECT AND START THE
PROGRAMME PRE-RINSE
1. To select Pre-rinse, press and hold 30 min for
3 seconds.
The light related to the button flashes.
Extra Power is not applicable to this
programme.
2. Close the appliance door to start the
programme.
HOW TO ACTIVATE EXTRA POWER
1. Select a programme.
2. Press Extra Power.
The light related to the button is on.
Extra Power is not a permanent option
and must be activated every time
before you start a programme.
It is not possible to activate or
deactivate Extra Power while a
programme is running.
Activating Extra Power increases the
water and energy consumption as well
as the programme duration.
HOW TO SELECT AND START THE
PROGRAMME AUTO
1. Press AUTO.
The light related to the button is on.
Extra Power is not applicable to this
programme.
2. Close the appliance door to start the
programme.
The appliance senses the type of load and adjusts
a suitable wash cycle.
HOW TO DELAY THE START OF A
PROGRAMME
You can delay the start of the selected programme
by 3 hours.
1. Select a programme.
2. Press .
The light related to the button is on.
3. Close the appliance door to start the
countdown.