Controls And Functions - ViewSonic PJ513D User Manual

Controls and functions

Projector
1. Focus ring
Adjusts the focus of the projected image.
See "Fine-tuning the image size and
clarity" on page 19
2. Zoom ring
Adjusts the size of the image. See
tuning the image size and clarity" on page
19 for details.
3. Power/Power indicator light
Toggles the projector on or off.
See "Start up" on page 17
down the projector" on page 28
details.
4. AUTO
Automatically determines the best picture
timings for the displayed image. See
"Auto-adjusting the image" on page 19
for details.
5. SOURCE
Displays the source selection bar. See
"Switching input signal" on page 18
details.
ViewSonic
3 4 5
for details.
"Fine-
and "Shutting
for
for
3
1
2
6 7 8 9
11
10
12 8
6. MENU/EXIT
Turns on the On-Screen Display (OSD)
menu.
Goes back to previous OSD menu, exits
and saves menu settings.
See "Using the menus" on page 31
details.
7. Temperature warning light
Lights up red if the projector's
temperature becomes too high. See
"Indicators" on page 42
8. Keystone/Arrow buttons (
/ Down)
Manually corrects distorted images
resulting from an angled projection. See
"Correcting keystone" on page 20
details.
9. Lamp indicator light
Indicates the status of the lamp. Lights up
or flashes when the lamp has developed a
problem. See "Indicators" on page 42
details.
for
for details.
/ Up,
for
for
PJ513D/PJ513DB