Display Menu; Picture Menu - ViewSonic PJ513D User Manual

DISPLAY menu

FUNCTION
(default setting/
value)
Aspect Ratio
(Auto)
Keystone
(0)
Position
(0)
Phase
(depends on the
selected input
source)
H. Size
(depends on the
selected input
source)
Digital Zoom
(100%)

PICTURE menu

Some picture adjustments are available only when certain input sources are in use.
Unavailable adjustments are not shown on the screen.
FUNCTION
(default setting /
value)
Preset Mode
(PC: Brightest;
YPbPr/ S-Video/
Video:
Standard)
Reference
Mode
Brightness
ViewSonic
DESCRIPTION
There are four options to set the image's aspect ratio depending on
your input signal source.
See "Selecting the aspect ratio" on page 21
Corrects any keystoning of the image. See
page 20 for details.
Displays the position adjustment page. To move the projected
image, use the directional arrow buttons. The values shown on the
lower position of the page change with every button press you made
until they reach their maximum or minimum.
Adjusts the clock phase to reduce image
distortion.
Adjusts the horizontal width of the image.
Magnifies or reduces the projected image. See
searching for details on the projected picture" on page 20
DESCRIPTION
Pre-defined preset modes are provided so you can optimize your
projector image set-up to suit your program type. See
preset mode" on page 22
Selects an preset mode that most suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
for details.
Adjusts the brightness of the image.
See "Adjusting Brightness" on page 23
32
(default setting/value)
for details.
"Setting the User 1/User 2 mode" on page 23
for details.
"Correcting keystone" on
"Magnifying and
for details.
"Selecting a
for details.
PJ513D/PJ513DB