Warranty And After-Service; Specifications - ViewSonic PJ452 User Manual

Warranty and after-service / Specifications

Warranty and after-service

If a problem occurs with the equipment, first refer to the "Troubleshooting" and run
through the suggested checks. If this does not resolve the problem, please contact
your dealer or the service company. They will tell you what warranty condition is ap-
plied.
Specifications
NOTE • This specifications are subject to change without notice.
Item
Product name
Panel size
Liquid
Crystal Drive system
panel
Pixels
Lens
Lamp
Power Supply
Power Consumption
Temperature range
Size
Weight (mass)
Ports
Lamp
Optional
Air filter
parts
Others
ViewSonic
Liquid crystal projector
1.5 cm (0.6 type)
TFT active matrix
786,432 pixels (1,024 horizontal x 768 vertical)
F=1.60 ~ 1.88 f=18.6 ~ 22.3 mm
165W UHB
AC100-120V/2.7A, AC220-240V/1.5A
240W
5 ~ 35°C (Operating)
285 (W) x 73 (H) x 202 (D) mm
(Not including protruding parts)
• Please refer to the following figure.
2.349 kg
RGB input:
RGB .....D-sub 15pin mini x 2
RGB Output:
RGB OUT ... D-sub 15pin mini x 1
Communication port:
CONTROL ........ D-sub 9pin x 1
Video input:
VIDEO ..................... RCA x 1
S-VIDEO ........... S-Video x 1
RLC-004
• Please consult your dealer.
• Please consult your dealer.
PJ452
Specification
Audio input:
AUDIO IN ..... Stereo mini x 1
Audio Output:
AUDIO OUT ... Stereo mini x 1
52