Auto Adjust Execute - ViewSonic PJ452 User Manual

Multifunctional settings
IMAGE menu (continued)
Item
H SIZE
AUTO ADJUST
EXECUTE
ViewSonic
Using the buttons ▲/▼ adjusts the horizontal size.
Large  Small
• This item can be chosen only at a RGB signal.
• When this adjustment is excessive, the picture may not be dis-
played correctly. In such a case, please reset the adjustment press-
ing the RESET button during this operation.
Choosing this item performs the automatic adjustment feature.
 At a RGB signal
The vertical position, the horizontal position, the horizontal phase, the
aspect and horizontal size will be automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. A dark picture may still be
incorrectly adjusted. Use a bright picture when adjusting.
 At a video signal
S-VIDEO · VIDEO:
The video format best suited for the respective input signal, the
vertical position, the horizontal position phase and the aspect will be
automatically adjusted.
COMPONENT:
The vertical position, the horizontal position, the clock phase and
the aspect will be automatically adjusted.
This function is available only when the AUTO mode is selected at
the VIDEO FORMAT MENU. Refer to Page of this manual.
For a component video signal, the signal type is automatically
identified, regardless of this function.
• The automatic adjustment operation requires approximately 10
seconds. Also please note that it may not function correctly with
some input.
PJ452
Description
32