Table of Contents
Advertisement
Troubleshooting
No power
Make sure the LCD TV is properly connected.
Make sure the AC power cord is properly connected.
Make sure the AC power is ON, DC power button is ON (Green LED).
Plug another electrical device (like a radio) to the power outlet to verify that the outlet is
supplying the proper voltage.
Poor or no picture
The TV station may be experiencing problems. Try another channel.
The Cable TV signal may be scrambled or encoded. Please contact your local cable
operator.
Make sure that connection to other components are correct.
Make sure that setup has been done correctly after connections.
Make sure the correct input is selected and the input signal is compatible.
Strange color, light color, or color misalignment
Ensure that the video cable is securely connected.
The picture may appear dim in a brightly lit room.
Adjust brightness and contrast.
Check the input signal setting.
No Sound
Check your audio connections
The MUTE button may have been pressed, try pressing this button again.
Check your audio settings, your TV audio may be set to minimum.
Press the Volume + (Up) button on the remote control.
Remote control unit does not operate
Make sure batteries are inserted correctly.
Batteries could be weak or dead. Replace batteries.
Is a fluorescent light illuminated near the remote control sensor?
The path of the remote control beam may be blocked. Make sure the path is clear and that
the remote control is aimed at the remote control sensor on the TV.
Press only one button at a time and it is the correct one for the operation you want to
perform.
Unit cannot be operated
External influences such as lightning or static electricity may cause improper operation.
In this case, operate the unit after first turning on the power of the LCD TVand the AVC
System, or unplug the AC cord for 1 to 2 minutes, then replug again.
33
ViewSonic
N2600w
Advertisement
Table of Contents
