Antenna Installation Instructions ... 5 Cleaning the LCD TV ... 5 Getting Started Package Contents ... 6 Fixing ViewSonic LCD TV to the Wall ... 6 Front View of the Product ... 7 Rear View of the Product ... 8 Remote Control ... 9 Installation ...
The mark shown to the right is in compliance with the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. ViewSonic N2652w...
4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight. ViewSonic Proposed Maximum Actual Concentration Concentration 0.1%...
Purchase Date: Product disposal at end of product life ViewSonic is concerned about the preservation of our environment. Please dispose of this product properly at the end of its useful life. Your local waste disposal company may provide information about proper disposal.
LCD TV screen or ® case. Some chemical cleaners have been reported to damage the screen and/or case of the LCD TV. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
3. Through the matching screw holes in the bracket, there are 6 screws mounted on the backside of the LCD TV. Loosen all 6 screws, and keep for future use. Use only approved wall-mounting brackets advised by ViewSonic or your local distributor. Notes: •...
1. Press VOL+ and MENU buttons at the same time to lock power button, and press VOL+ and MENU buttons again to unlock it. 2. Press VOL- and VOL+ buttons at the same time to lock OSD menu, and press VOL- and VOL+ buttons again to unlock it. ViewSonic N2652w...
Connect this port to the HDMI output of A/V device. SPDIF Optical output Connect this port to the SPDIF input of A/V device. Headphone Jack Connect this port to your headphone. Power (AC input) Using power cord provided, connect to a power source. ViewSonic N2652w...
Page 12
25 PIP/POP 26 P.INPUT 27 V-CHIP 28 SWAP Note: PIP means Picture In Picture. POP means Picture Out Of Picture. ViewSonic Power ON/OFF Select Mono, Stereo or SAP in TV / Select audio language in DTV Display current information Set TV Sleep timer...
1) TV: Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable. Preset the TV channels into memory with Auto Scan function when using an antenna or cable TV system without a cable connecter box (See page 20). ViewSonic RF Cable or Adapter (not supplied) N2652w...
Page 14
3. Connecting to DVD / Set Top Box Connect Video/ Audio cables from compatible devices into the back panel of LCD TV. 1) With AV cable: 2) With S-Video cable: ViewSonic Antenna (not supplied) RCA A/V Cable VCR or DVD Player...
4. Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately). ViewSonic YPbPr Cable (not supplied) Audio in Cable...
Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV. 7. PC Audio In Connect the Audio cable (green) from audio output of your computer to the audio input terminal (green) of the LCD TV. ViewSonic VGA 15 Pin Cable PC Audio Connection (not supplied) N2652w...
Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet. AC wall socket ViewSonic Audio Cable (not supplied) A/V Device...
Modes, and Smart Picture Modes, depending on what input source it is in.) Main Window Input Channel TVBS Resolution NTSC Audio Type MONO Smart Sound Mode User Smart Picture Mode User ViewSonic (Program title.) Stereo 1080i H D (Program details.) RF2-1 N2652w...
Page 19
Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off the LCD TV after a preset period of time passed. There are several times for choice – OFF, 30min, 60min, 90min, or 120min. ViewSonic N2652w...
Page 20
• Use ▲▼ to select the control you want to adjust. • When selecting the control with Press <ENTER>, press ENTER to enable the function. • Press ◄► to adjust the settings. • Press MENU to exit from the OSD menu. ViewSonic N2652w...
• Audio Out: To control sound output ON/OFF from the RCA audio out connectors. Note: To adjust the Audio settings, Smart Sound must be set to the User mode. (Select through the Sound button on the remote control) ViewSonic N2652w...
Cancel or exit without pressing OK. Setup Menu — To set up OSD window Setup Menu is active in all input sources. • Language: To select a OSD language from English, French or Spanish. • Parental: To set up parental control. ViewSonic N2652w...
Page 23
Aspect Ratio: To select image size between Normal, Full, Wide1, Wide2, Wide3, 4:3, 16:9, and No scale. • OSD Timeout: To setup the display time of OSD. (5, 15, 45, and 60 seconds) • Memory Recall: To restore the factory default settings. ViewSonic N2652w...
SPDIF Type: To select the type of audio transfer file format. • Auto Scan: Press ENTER to start scanning DTV channels automatically. Press MENU at any time to cancel Auto Scan. • Manual Scan: To scan the DTV channels manually. Press ENTER and select Scan Mode with ◄►. ViewSonic N2652w...
Page 25
Press ENTER to start scanning, and press MENU at anytime to cancel scanning. • Channel Skip: To skip channels when viewing channels with CH ▲ and ▼. Press ENTER, and then use ENTER to check/uncheck the channel you want to skip. ViewSonic N2652w...
Page 26
Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or Magenta. Font Opacity: To select font opacity from Solid, Translucent, or Transparent. Background Color: To select background color. Background Opacity: To select background opacity. Window Color: To select window color. Window Opacity: To select window opacity. ViewSonic N2652w...
Note: The factory default of the password is “0000”. If you have changed the password, please make sure you remember the new password, because you cannot recall the default setting of the password by any selection. Use ▲▼ to select your desired optional item, and press ENTER. ViewSonic N2652w...
Page 28
7 and above TV-G General audience Use ENTER button to block or unblock the ratings, and use MENU to exit. ViewSonic Restricted NC-17 No one 17 and under limited Adult audience only TV-PG Parental guidance suggested...
Page 29
Use ENTER button to block or unblock the ratings, and use MENU to exit. • Block MPAA Unrated: To block unrated movies. • Block TV None Rating: To block unrated TV programs. ViewSonic CE_PG Parental guidance CE_14 Viewers 14 years and older CE_18 Adult programming CF_13ANS This emission can not be appropriate...
2. Use ◄► to select the sub-input source and press ENTER to confirm. Note: To select the input source for main screen, press INPUT button. • SWAP: Press SWAP to exchange main screen to sub-screen, including video and sound. The function is available both in PIP and POP. ViewSonic POP Screen N2652w...
Page 31
PIP Position Select: Press P.POS to select the position of sub-screen. The function only acts on PIP. Note that the screen indexed with the pink frame is the screen you select to set up. Use ◄► to move the index between the main screen and the sub-screen. ViewSonic N2652w...
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD TV. Note: Product Specifications are subject to change without notice. ViewSonic 26” TFT Active Matrix RGB 0.4215 (H) x 0.4215 (V) mm pixel...
• CATV is connected improperly or not connected; please check all the CATV connections. • The cable TV service is interrupted; please contact your cable operator. Picture is cut off/with sidebar screen • Is the image positioned correctly? • Are screen mode adjustments such as picture size set correctly? ViewSonic N2652w...
Customer Support For technical support or product service, see the table below or contact your reseller. Note: You will need the product serial number. Country/ Web Site Region United States www.viewsonic.com/support/ Canada www.viewsonic.com/support/ ViewSonic T=Telephone Email F=Fax T= (800) 688 6688 service.us@viewsonic.com...
How long the warranty is effective: ViewSonic LCD TV are warranted for one (1) year for all parts excluding the light source and one (1) year for labor from the date of the first customer purchase. Who the warranty protects: This warranty is valid only for the first consumer purchaser.