Picture | Advanced | Input - ViewSonic PLED-W500 User Manual

PICTURE | Advanced | Input

selection. The projector will not search for inputs that are not selected.
SD card and USB A are not in the auto source route, please manually select them.
USB Display (display over USB) can be easily operated to project a computer's
screen by using a single USB cable (mini B type to A type) without any other
drivers.
1. Choose source: Press the "PC" button on the remote control to choose
source from the mini USB connector.
2. Connection: Connect the USB cable to the mini USB of projector and USB
type A of the computer.
3. Automatically projected: When detecting the computer, the screen will be
automatically projected out.
4. End the projection: When unplugging the USB cable, the projection will be
stopped.
Only one computer can be connected at one time.
27