Powering On/Off The Projector; Powering On The Projector - ViewSonic PLED-W500 User Manual

Powering On/Off the Projector

Powering On the Projector

1. Remove the lens cap.
2. Securely connect the power cord and signal cable. When connected, the Power
3. Turn on the lamp by pressing
control. The Power LED will turn blue.
4. Turn on your source that you want to display on the screen (computer, note-
book, video player, etc). The projector will detect the source automatically and
will display on the screen.
5. If you connected multiple sources at the same time, press the "Source" button
on the remote control to switch between inputs.
1
2
LAMP
" " button on the control panel or on the remote
2
or
15
Power Laser
HDMI PC
SD/USB Video
Enter