Powering Off The Projector; Led Indicator Messages - ViewSonic PLED-W500 User Manual

Powering Off the Projector

1. Press the " " button on the control panel or on the remote control
the projector. The following message will be displayed on the screen.
Press the "
2. The Power LED will turn red and blink rapidly after the projector is turned off.
And the fans will continue to operate for about 30 seconds to ensure that the
system cools properly.
solid red to indicate standby mode.
4. It is now safe to unplug the power cord.

LED Indicator Messages

Message
Power Plug
Standby
Power button ON
Cooling state
Power button OFF:
Cooling completed; Standby Mode
Firmware download
Thermal sensor error, OSD showing as
below:
1. Make sure air in and outlets are not
blocked.
2. Make sure the environment temperature
is under 40 degree C.
Fan lock error, OSD showing as below:
The projector will switch off automatically.
Lamp error (LED, LED driver, Light sensor)
Lamp LED Temp LED
(Red) (Red)
Flash ON to OFF Flash ON to OFF
100ms 100ms
- -
- -
- -
- -
ON ON
- ON
0.5 second H(On),
- 0.5 second L(Off)
ON -
16
to turn off
Power LED Power LED
(Red) (Blue)
Flash ON to OFF
-
100ms
ON -
- ON
0.5 second H(ON),
0.5 second L(OFF) -
ON -
ON -
- ON
- ON
- ON