Picture | Advanced | Input - ViewSonic PLED-W500 User Manual

Hide thumbs Also See for PLED-W500:

Table of Contents

PICTURE | Advanced | Input

Use this option to enable/disable input sources. Press ► button to enter the sub

menu and select which sources you require. Press the "Enter" button to finalize the

selection. The projector will not search for inputs that are not selected.

SD card and USB A are not in the auto source route, please manually select them.

USB Display (display over USB) can be easily operated to project a computer's

screen by using a single USB cable (mini B type to A type) without any other

drivers.

1. Choose source: Press the "PC" button on the remote control to choose

source from the mini USB connector.

2. Connection: Connect the USB cable to the mini USB of projector and USB

type A of the computer.

3. Automatically projected: When detecting the computer, the screen will be

automatically projected out.

4. End the projection: When unplugging the USB cable, the projection will be

stopped.

Only one computer can be connected at one time.

Table of Contents