Husky HPRO27SLOCKERBL Use And Care Manual page 7

1
Installing Locker to right side of Workbench
□
Remove the door of the Locker (A) by removing the 11 Phillips head bolts inside the hinge of the Locker (A). Flip the door and
re-orient to the other side. Then re-install the door with the 11 Phillips head bolts along the hinge located on the right side of
the Locker (A).
□
Ensure the door is level and centered in the opening before tightening the 11 bolts.
□
Remove the Kwikset Smartkey® lock cylinder from the door, ip and reinstall for proper key orientation.
□
Remove the Power outlet (C) from the left wall of the Locker (A) by removing the 6 Phillips head screws from the outlet panel
cover (D) and gently pulling the Power outlet (C) and holder from the cabinet.
A
A
D
C
7 Please contact 1-888-HD-HUSKY
A
Opening
direction
HUSKYTOOLS.COM
for further assistance.
Opening
direction