Sony KLV-32V530A Service Manual page 92

Favourite Set-up
Auto Tuning
Programme Sorting
Programme Labels
Programme Block
Intelligent Picture
Manual Programme
Preset
Allows you to set your favourite channels by assigning the desired channel
numbers.
To reset the favourite channels, select "– – –".
Tunes in all the available channels.
You can retune the TV after moving house, or to search for newly launched
channels.
Changes the order of channels stored in the TV.
1
Press F/f to select the channel you want to move to a new position, then press
.
2
Press F/f to select the new position for the channel, then press
Assigns a channel name of your choice, up to five letters or numbers. The name
appears briefly on the screen when you select the channel. Names for channels are
usually taken automatically from Text (if available).
1
Press F/f to select the channel you want to name, then press
2
Press F/f to select the desired letter or number ("_" for a blank space), then
press g.
If you enter a wrong character
Press G/g to select the wrong character. Then, press F/f to select the correct
character.
3
Repeat step 2 until you finish entering the name.
4
Press to exit the labeling procedure.
Blocks an individual channel from being watched.
1
Press F/f to select the channel you want to block, then press
2
Press F/f to select "Block", then press
To watch the channel, select "Allow".
On with Indicator Automatically reduces the picture noise. The signal level bar
is displayed when the channel is changed or the display is
changed from an input screen to a TV programme.
On Automatically reduces the picture noise.
Off
Turns off the "Intelligent Picture" feature.
To preset a channel, press PROG +/– to select the programme number, before
selecting "Label", "AFT", "Audio Filter", "Skip", "Signal Booster" or "Colour
System". You cannot select a programme number that is set to "Skip" (page 32).
Programme/ Presets programme channels manually.
1
TV System/
Frequency
2
3
4
5
6
Label Assigns a name of your choice to the selected channel. This
name appears briefly on the screen when you select the
channel.
To input characters, follow steps 2 to 4 in "Programme
Labels" (page 31).
.
Press F/f to select "Programme", then press
Press F/f to select the programme number you want to
manually tune (if tuning a VCR, select programme 0),
then press .
Press F/f to select "TV System", then press
Press F/f to select the best received TV broadcast
systems, then press .
Press F/f to select "Frequency", then press
Press G/g to search for the next available channel. The
frequency band ("VHF Low", "VHF High" or "UHF")
is changed accordingly.
.
.
.
.
.
.
31
(Continued)
GB