Sony KLV-32V530A Service Manual page 87

Advanced Settings
Sound
Target Inputs
Sound Mode
Reset
Treble
Bass
Balance
Intelligent Volume
Volume Offset
26
GB
Allows you to set "Picture" settings in more detail. These settings are not available
when "Picture Mode" is set to "Vivid" (or "Photo-Vivid").
Reset Resets all the advanced settings to the factory settings.
Black Corrector Enhances black areas of the picture for stronger contrast.
Adv. Contrast Automatically adjusts "Backlight" and "Picture" to the most
Enhancer
suitable settings judging from the brightness of the screen.
This setting is especially effective for dark images scenes,
and will increase the contrast distinction of the darker picture
scenes.
Gamma Adjusts the balance between bright and dark areas of the
picture.
Auto Light
Reduces glare such as in scenes where the entire screen is
Limiter white.
Clear White Emphasises white colours.
Live Colour Makes colours more vivid.
White Balance Adjusts the temperature of each colour.
Allows you to select whether to use the common settings or to make custom
settings for the input you are currently viewing.
Common Applies common settings to all inputs in which "Target
Inputs" is set to "Common".
Name of current Allows you to make custom settings for the input.
input (e.g. Video
1)
Sets a sound mode. "Sound Mode" includes options best suited for video and
photographs, respectively. The options that can be selected differ depending on the
scene select settings.
Dynamic
Enhances the treble and bass sounds.
Standard
For standard sounds. Recommended for home entertainment.
Clear Voice
Makes voice sound clearer.
Resets all the "Sound" settings to the factory settings excluding "Target Inputs",
"Sound Mode" and "Dual Sound".
Adjusts higher-pitched sounds.
Adjusts lower-pitched sounds.
Emphasises the left or right speaker.
Keeps volume level constant across all programmes and adverts (e.g. adverts tend
to be louder than programmes).
Adjusts the volume level of the current input relative to other inputs, when "Target
Inputs" is set to the current input name (e.g. Video 1).