Disassembly; V530A, V550A, V550A/R, V550A/W - Sony KLV-32V530A Service Manual

KLV-32, 40 V530A, 32, 40, 46, 52 V550A
Note:
1) The illustrations provided in this section might have slight difference from actual sets.
2) Refer to Removal & Installation of Rear Cover and Switch Unit Procedure in Section 1 Safety Notes.
4-1. KLV-32 V530A, V550A, V550A/R, V550A/W
4-1-1. Rear Cover Removal
3
Two screws
(+PSW M4 X 8)
2
Two screw
(+BVTP 3 X 12)
1
Fifteen screws
(+BVTP2 4 X 16)
4
Lift to remove
Rear Cover
4-1-3. Switch Unit Removal
4-1-5. BA Board Removal
2 Remove connectors
5 One screw
(+BVTP 3 X 12)
6 Frame, Main (32)
RM-GA015
SECTION 4

DISASSEMBLY

2 Lift tabs to
remove board
3 Switch unit
1
1 Bracket Side Jack
3 Nine screws
(+BVST 3 X 8)
4 BA board
4-1-2. Stand Assy Removal
4-1-4. Power Unit Removal
1 Two screws
(+BVST 3 X 8)
3 Remove connectors
4-1-6. Frame Removal
2 One screw
(+PSW M4 X 8)
3 One screw
(+PSW M4 X 8)
4 Frame Spine (32L)
6 One screw
(+PSW M4 X 8)
– 16 –
1 Four screws
(+PSW 5 X 16)
2 Stand assy
3 One screw
(+BVTP2 4 X 16)
4 Bar Under (S)
2 Two screws
(+BVST 3 X 8)
4 Power Unit
1 Cover, Under (S)
5 One screw
(+PSW M4 X 8)
7 Frame Spine (32R)
8 One screw
(+PSW M4 X 8)
9 Two screws
(+BVTP2 4 X 16)
q; One screw
(+PSW M4 X 8)
qa Frame Bottom (32)