Sony KLV-32V530A Service Manual page 80

Connecting audio-video equipment (quality order, high to low)
Connect to Connect with
4 HDMI IN 1, 2, 3, HDMI cable
or 4
(HDMI IN 4:
KLV-52/46/40/
32V550A only)
/ 1 or 2 Component video
3
cable, audio cable
2 7 1, 1 S-video cable or
or 2, and 1 composite video
or 2 cable, audio cable
Connecting audio/portable equipment
Connect to Connect with
1 Audio cable
6 USB
USB cable
Connecting other equipment
Connect to Connect with
5 / PC IN PC cable with
ferrites, audio
cable
8 i Headphones
Description
Digital video and audio signals are input from the connected
equipment.
In addition, when you connect the equipment that is
compatible with control for HDMI, communication with the
connected equipment is supported. See page 30 to set up this
communication.
If the equipment has a DVI socket/jack, connect the DVI
socket/jack to the HDMI IN 1 socket/jack through a
DVI - HDMI adaptor interface (not supplied), and connect
the equipment's audio out socket/jack to the PC/HDMI 1
AUDIO IN socket/jack in the PC IN sockets/jacks.
~
• Be sure to use only an authorized HDMI cable bearing the
HDMI logo. We recommend that you use a Sony HDMI
cable (high speed type).
When using the component video jack
3, select "Video 3" in the "Video 3/Component 1 Input"
menu (page 30).
~
• You cannot use the component video jack
video jack 3 at the same time.
To avoid picture noise, do not connect the camcorder to the
video jack and the S video jack
If you connect a mono equipment, connect to the L (MONO)
jack or 2.
When using the video jack
output jacks, select "Output" in the "Video 1 Input/Output"
menu (page 30).
Description
You can listen to TV sound on the connected Hi-Fi audio
equipment.
You can enjoy photo/music/video files stored in a Sony
digital still camera, camcorder or USB storage device
(page 21).
Description
It is indispensable to use a PC cable with ferrite cores.
You can listen to TV sound through headphones.
1 as the video jack
1 and the
1 at the same time.
and audio jack as
19
GB