Switch & Ac Motor Replacement - Removal - Dyson DC22 Service Manual

Switch & AC motor replacement - removal
Before continuing the following parts should be removed as previosly shown:
Cable rewind assembly (pages 9-16).
Service manual
Models with finger
tip controls only
40 Carefully detach all wires from
the satellite assembly. Place the
satellite assembly to one side.
41 Carefully detach the motor wires
from the PCB assembly EMC (on
models with finger tip controls)
or the switch on models without
finger tip controls).
42 Undo the short screw in the
cyclone inlet assembly.
24