LG KG70c Service Manual page 67

Single band cdma mobile phone
Table of Contents

Advertisement

KG70C
Seizure Precursor. The initial digital sequence transmitted by a mobile station to a base station on a
reverse analog control channel.
Seizure Option. A service capability of the system. Service options may be applications such as voice,
data, or facsimile.
Shard Secret Data (SSD). A 128-bit pattern stored in the mobile station (in semi-permanent memory)
and known by the base station. SSD is a concatenation of two 64-bit subsets: SSD_A, which is used
to support the authentication procedures and SSD_B, which serves as one of the inputs to the
process generating the encryption mask and private long code.
Short Message Services (SMS). A suite of services which include SMS Text Delivery, Digital Paging
(i.e., Call Back Number – CBN), and Voice Mail Notification (VMN).
SID. See System Identification.
Signaling Tone. A 10kHz tone transmitted by a mobile station on an analog voice channel to: 1)
confirm orders, 2)signal flash requests, and 3) signal release requests.
Signal Traffic. Control message that are carried between the mobile station and base station on the
Traffic Channel. See also Primary Traffic and Secondary Traffic.
Slot Cycle. A periodic interval at which a mobile station operating in the slotted monitors the Paging
Channel.
Slotted Mode. An operation mode of the mobile station in which the mobile station monitors only
selected slots on the Paging Channel when in the Mobile Station Idle State.
Soft Handoff. A handoff occurring while the mobile station is in the Mobile Station Control on the
Traffic Channel State. This handoff is characterized by commencing communications with a new base
station on the same CDMA frequency assignment before terminating communications with the old
base station. See also Hard Handoff.
SOM. Start-of-Message Bit.
SPS. Symbols per second.
- An identification of certain characteristics of a mobile station. Classes are defined in Table 2.3.3-1.
Status Information. The following status information is used to describe mobile station operation when
using the analog system.
Serving-System Status. Indicates whether a mobile station is turned to channels associated with
System A or System B.
First Registration ID Status. A status variable used by the mobile station in association with its
processing of received Registration ID messages.
First Location Area ID Status. A status variable used by the mobile station in association with its
processing of received Location Area ID messages.
Location Registration ID Status. A status variable used by the mobile station in association with its
processing of power-up registration and location-based registration.
First Idle ID Status. A status variable used by the mobile station in association with its processing of
the Idle Task.
66

Advertisement

Table of Contents
loading

Table of Contents