HP HPE FlexFabric 5901 Series Installation Manual page 29

•
The console cable is correctly connected.
•
The PC has started, and its serial port settings are consistent with the console port settings on
the switch.
Power on the switch. During the startup process, you can access Boot ROM menus to perform tasks
such as software upgrade and file management. The Boot ROM interface and menu options differ
with software versions. For more information about Boot ROM menu options, see the
software-matching release notes for the device.
After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see HPE FlexFabric 5901 Switch
Series Configuration Guides and HPE FlexFabric 5901 Switch Series Command References.
25