Install And Replace The Remote Control Battery; Using The Digital Photo Frame's Screens; The Home Screen - Pandigital PAN7001W01 User Manual

Install and Replace the Remote Control Battery

1. Hold the Remote Control with the control buttons facing downward.
2. While pressing down on the ridged area of the battery cover, pull the tray
out.
3. Place a "CR2025" Lithium battery on the tray with the positive "+" end
facing toward you.
4. Close the tray.

Using the Digital Photo Frame's Screens

You access the Digital Photo Frame's functions from either the Edge Touch
interface, the buttons located at the top of the picture frame or with the remote
control.
This user guide primarily describes the use of the remote control. Please
see the PanTouch Quick Guide for instructions on using the PanTouch
interface.

The HOME Screen

The HOME Screen gives you the following choices listed below.
8