Deleting Photos From The Built-In Memory; Delete The Displayed Photo; Delete A Single Photo On The Thumbnails Screen - Pandigital PAN7001W01 User Manual

3. Press the SELECT button to select the card.
4. Press BACK to go back to Home screen.
5. Highlight Photo and press ENTER. The Thumbnails screen opens.
6. Press the COPY ALL button.
7. Once the copying is complete, a "transferring and Finished!" dialog will
display on the middle of the screen.

Deleting Photos from the Built-in Memory

You can delete photos from built-in memory, but not from memory cards using
the remote control.

Delete the Displayed Photo

Use the Remote Control to operate:
1. With the internal photo displayed on the screen, press the SETUP button.
2. Press the Up or Down arrow key to select Delete Photo.
3. Press ENTER to delete the displayed photo.
4. Press EXIT to close the menu.
Use the PanTouch menu to delete:
1. With the photo displayed on the screen, press the PanTouch point to
activate the sensor.
2. Press DELETE to delete the displayed photo.
Note: It is a good idea to keep backup copies of the photos you copy onto
your Digital Photo Frame.

Delete a Single Photo on the Thumbnails Screen

Use the Remote Control to operate:
1. With the Thumbnails Screen displayed, use Arrow buttons to select a
photo to a delete.
2. Press the SETUP button.
3. Press the Up or Down arrow to choose Delete Photo and press ENTER.
4. Choose delete selected option to delete the highlighted photo.
17