Setting Up The Digital Photo Frame - Pandigital PAN7001W01 User Manual

Setting Up the Digital Photo Frame

The Digital Photo Frame is easy to set up. Just follow these steps:
1. Plug the AC Power Adapter into the Digital Photo Frame and into a wall
outlet.
2. Insert a memory card into the appropriate slot.
Slot 1 - Compact Flash™
Slot 2 - Secure Digital™ or MultiMedia Card™,
Memory Stick™, MemoryStick Pro™, Memory Stick Duo™, or Memory
Stick Pro Duo™, or xD Memory Card™
Note: The card will only fit in one direction; do not force it. The card should
fit snugly when properly inserted.
3. Slide the POWER button on the left side of the Digital Photo Frame up,
the Digital Photo Frame will power on and automatically
of the photos on the card. Slide the POWER button down to power off.
4. To display photos individually, press the EXIT button on the remote
control to pause slideshow.
5. Press of Exit button will display thumbnail screen. Use the directional
arrows to choose a photo. Press the Enter on the top of the Digital Photo
Frame, on the
Digital Photo Frame.
Note: Pull the plastic tab sticking out of the remote control. It protects the
battery, and the remote control will not work unless it is removed.
6. To restart the Slideshow, press the Enter key again, or press the
remote control. The selected photo is displayed on the
start a slideshow
6