Replace The Remote Control Battery - Pandigital PAN7004AWBB User Manual

Note: Before first time use, pull the plastic tab
sticking out of the remote control. It protects
the battery and the remote control will not work
unless it is removed.
Start Slideshow
Exit or go back
Scroll Up
Scroll Previous
Play/Pause/Select object
Volume adjust higher
or Select object
Volume - adjust lower
or De-select object

Replace the Remote Control Battery

1. Hold the remote control with the buttons facing down.
2. Push and hold the small release tab while pulling the
battery tray out.
3. Replace the "CR2025" Lithium battery on the tray with
the positive (+) side facing up.
Push the tray back in until it clicks into place.
4.
Access Setup screens
Scroll Forward
Scroll Down
Rotate image
Enlarge image
Release tab
7