Starting The Charger - ADT -CHG-120 Instruction Manual

,QVWDOOLQJ WKH &KDUJHU
Warning: Do not
connect the Battery
Interconnect Cable
at this time.
Refer to "Starting the
Charger" on page 16.
6
2YHUYLHZ
you can connect 25 AH –120 AH batteries to the charger. This section provides
illustrations and instructions for connecting two batteries or for connecting four batteries.
&RQQHFWLQJ 7ZR %DWWHULHV
charger:
%
Figure 5 Connecting 25 AH Batteries
Table 3 contains instructions for connecting batteries to the charger:
Step Action
1 Remove all power sources to the charger.
2 Connect the battery negative cable to the TB2 terminal (on the charger labeled
"Battery –" as shown in Figure 5.
3 Connect the battery positive cable to the TB2 terminal (on the charger)
labeled "Battery +" as shown in Figure 5.
4 Proceed to the section "Connecting the Charger." Do not connect the Battery
Interconnect Cable at this time—refer to "Starting the Charger" on page 16.
Figure 5 shows how to connect two 25 AH batteries to the
036
Table 3 Connecting 25 AH Batteries
ADT-CHG-120 Instruction 05/01/98 PN 50938:A
Connecting Batteries to the Charger
7%
$'7&+*