Table of Contents
Advertisement
Appendix
SBF
A sideband filter that lets specific frequency components pass through.
Parameter
Value
0–100
INTERVAL
0–100
WIDTH
BALANCE
100-0–0-100 (%)
SBF1, SBF2, SBF3,
TYPE
SBF4, SBF5, SBF6
-INF, -52.3–+10.0
GAIN
(dB)
Stopper
This effect lowers the sample playback speed, reproducing the sound of a turntable stopping.
Parameter
DEPTH
0–100
1/128, 1/64, 1/32, 1/16, 1/8, 1/4, 1/2,
RATE
1, 2
0–100
RESONANCE
0–100
FLT MOD
AMP MOD
0–100
Tape Echo
This is a virtual tape echo effect that gives a realistic tape delay sound.
The effect simulates the tape echo section of a Roland RE-201 Space Echo.
Parameter
Value
10–800 (ms)
TIME
FEEDBACK
0–99
LEVEL
0–100
S, M, L, S+M, S+L, M+L,
MODE
S+M+L
0–100
W/F RATE
W/F
0–100
DEPTH
TimeCtrlDly
This is a delay in which the delay time can be varied smoothly.
Parameter
TIME
0–100
FEEDBACK
0–99
LEVEL
0–100
FLAT, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800
L DAMP F
(Hz)
630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000, 5000,
H DAMP F
6300, 8000, 10000, 12500, FLAT (Hz)
132
Sets the band interval. Larger values produce wider band intervals, and the frequency
of each band increases.
Sets the bandwidth. Larger values produce a narrower bandwidth, which further
isolates the specific frequency components that pass through the filter.
Adjusts the volume balance between dry (the original sound) and effect sound.
Sets the range in which the filter works.
Adjusts the volume of the effect sound.
Value
Adjusts how much the playback speed should be slowed down.
Sets the period at which the playback speed is changed.
Adjusts the filter's resonance level.
Increasing the value further emphasizes the effect, for a more
unusual sound.
Attenuates the high-frequency range according to the playback
speed.
Lowers the volume according to the playback speed.
Sets the tape speed.
Larger values make the tape speed slower, which creates a longer interval between
delay sounds.
Adjusts the volume of the delay repeat sound.
Adjusts the volume of the effect sound.
Selects the combination of playback heads to use.
Sets the speed of wow/flutter (the complex variation in pitch caused by tape wear
and rotational irregularity).
Sets the depth of wow/flutter.
Value
Explanation
Explanation
Explanation
Explanation
Sets the sound delay time.
Adjusts the amount of feedback for the effect.
Sets the volume of the effect sound.
Sets the frequency range that is attenuated each
time the delay repeats.
Advertisement
Table of Contents
