Specifications; Standard Accessories - Panasonic WR-XS3 Operating Instructions Manual

SPECIFICATIONS

Basic Specifications
Power supply
Power consumption
Temperature range
Dimensions
Weight
Frequency response
High-pass filter
Total harmonic distortion
Input conversion noise
Residual noise
Maximum input
Maximum output
Crosstalk
Common mode rejection ratio
Maximum voltage gain
Input Circuit
Mono inputs 1 to 4
Stereo inputs 1 to 4
Multi input (mono)
Multi input (stereo)
Sub input
Output Circuit
Stereo output
Mono output
Sub output
Recording output
* Power supply is not switchable but conformed to your area.

STANDARD ACCESSORIES

Rack mounting screws (M5 x 12) .................... 4 pcs.
Rubber feet ...................................................... 4 pcs.
Acrylic cover ...................................................... 1 pc.
Acrylic cover mounting screws (M3 x 6).......... 2 pcs.
Acrylic cover mounting spacers ...................... 2 pcs.
Label .................................................................. 1 pc.
Operating Instructions (this book) ..................... 1 pc.
AC power cord .................................................. 1 pc.
Guarantee (U.S.A. and Canada only).................1 pc.
38
120 V AC, 60 Hz or 220 V to 240 V AC, 50 Hz*
10 W
0 °C - +45 °C (32 °F - 113 °F)
480 mm (W) x 44 mm (H) x 250 mm (D) [16-15/16" (W) 1-3/4" (D) x 9-7/8"] (when shipped,
excluding projections such as knobs)
Approx. 3.4 kg (7.5 lbs.)
20 Hz to 20 kHz +0 dB/–0.5 dB (stereo input)
300 Hz to 20 kHz +0 dB/–0.5 dB (mono input, sensitivity + 60 dBu)
20 Hz to 20 kHz (included in all mono inputs)
0.1 % or less (at mono input)
–126 dB or less (source impedance 150
–94 dB or less (status where the knobs of all volumes and fader levels are turned down as
far as possible, audio band 22.4 Hz to 22.4 kHz)
+12.2 dB or more (stereo input)
+10 dB or more (mono input, when microphone is selected)
+24 dB or more (main output, sub output)
–80 dB or less, 1 kHz (between adjacent channels)
70 dB or more, 1 kHz (mono input, at –60 dB of sensitivity)
11.8 dB or more (stereo input)
64 dB or more, 1 kHz (mono input, when microphone is selected)
–60 dBu, 10 k , balanced, mono input, four circuits, XLR
–10 dBV (–7.8 dBu), 10 k , unbalanced, stereo input (L/R), four circuits, pin
–45 dBu, 10 k , balanced, mono input, one circuit, XLR
–10 dBV, (–7.8 dBu), 10 k , unbalanced, stereo input (L/R), one circuit, ø3.5 mm (1/8")
stereo mini (front panel)
+4 dBu, 10 k , unbalanced, stereo input (L/R), one circuit, RCA
+4 dBu, 10 k , electronically balanced, stereo output (L/R), one circuit, TRS
+4 dBu, 10 k , electronically balanced, mono output, one circuit, TRS
+4 dBu, 10 k , electronically balanced, mono output, one circuit, TRS
–10 dBV, 10 k , unbalanced, stereo output (L/R), one circuit, pin
or less, audio band 22.4 Hz - 22.4 kHz)