Paper Specifications For Printer; Specifications Of Thermal Paper - Fujitsu TeamPoS 7000 Series User Manual

5.4 Paper specifications for printer

5.4.1 Specifications of thermal paper

Here are the genuine paper specifications. Substances which damage the thermal head or the
cutter might be included in a paper other than the genuine one. Failures such as a head
breaking, a cutter trouble, or platen worn if you use a paper which is not genuine. Be sure to
use a recommended (genuine) paper.
If you use a paper other than the recommended one, be sure to use one which meets the
specifications below. If you use a paper which does not meet the specifications, the failures
below might occur. When a failure occurs due to a paper which is not the recommended one, it
takes cost and time for investigating the paper.
Specifications for printing paper
Characteristics
of paper
Durability
*1
Sensitivity
*2
*1 : Durability
The durability in the common temperature and humidity (25 degrees, 60% RH or less) and dark
place.
*2 : Sensitivity
D: OD value measured by Macbeth Color Checker
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Weighing capacity
Thickness
Tensile strength
longways/widthways
Tear strength
longways/widthways
Smoothness
Brightness
Normal durability type
Normal durability type
High durability type
Sensitivity
0.2 mj/Dot
0.3 mj/Dot
2
51 to 67 g/m
65 to 83μm
2.0/1.0 KN/m or more
180/220 mN or more
200 to 250 sec
80% or more
5 years or more
7 years or more
10 years or more
0.37 D or more
1.00 D or more
Harmful effect of other papers
Misprint and misfeed
cutting error and misfeed
Jamming
Fading
-
Deterioration of durability before
and after printing
Fading
Page 30