Names And Function; Switch And Leds - Fujitsu TeamPoS 7000 Series User Manual

1.4 Names and Function

1.4.1 Switch and LEDs

⑥
No.
1 Power button
2 Dump switch
3 Volume control button
4 Brightness control button
5 Power LED
6 Disk access LED
7 Standby LED
8 Backup LED
9 Diagnostic LED (Memory)
10 Diagnostic LED (FAN)
11 Diagnostic LED
(Disk[Slave])
12 Diagnostic LED
(Disk[Master])
13 Proximity sensor
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
⑤
①
⑦ ⑧ ⑨ ⑩
Name
Turning the power on/off the system
When pushed, output the memory dump and reset the system.
This switch may corrupt the programs and data on SSD. So, don't use
this procedure except in an emergency.
Up (+) : increase speaker volume
Down (-) : decrease speaker volume
Up (+) : increase monitor brightness
Down (-) : decrease monitor brightness
LED turns on when the system is powered
LED turns on when SSD is being accessed.
LED turns on when AC power is supplied.
LED blinks when the system is running on backup battery.
* Backup battery is option.
LED turns on when system detect the memory error
LED turns on when system detect the CPU FAN failure
LED turns on when system detect the SSD error on port1
LED turns on when system detect the SSD error on port0
This sensor can detect the person in front of display
⑪ ⑫ ② ④
Function
⑬
③
Page 6