Safety - Fujitsu TeamPoS 7000 Series User Manual

Safety

Battery
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or
equivalent type recommended by the manufacturer. Discard used batteries according to
the manufacturer's instructions.
Limited Power Source
The 24V powered USB port on the terminal does not meet UL limited power source

(LPS) requirements. This port is limited to only allowing 24V Retail POS powered USB
peripherals that do not exceed a rated current of .2 Amps and are provided with a
molded plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
The 24V powered Cash Drawer port on the terminal does not meet UL limited power

source (LPS) requirements. This port is limited to only allowing 24V Retail POS
peripherals that do not exceed a rated current of .2 Amps and are provided with a
molded plastic Fire Enclosure, Rated Min. 94V-1 or Metal enclosure.
Current Loading
Powered USB ports are used for POS peripherals. The current loading for each port is specified in the
following table.
Port
12V PUSB
12V PUSB
12V PUSB
24V PUSB
USB
USB
USB
USB
USB
12V and 24V powered USB ports are used for POS peripherals, all 12V and 24V powered
USB peripherals connect to systems are designed without consuming 5V.
5V USB under PUSB port is only for signal communication.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Rating
+12V:1.3A, +5V:0A
+12V:0.4A, +5V:0A
+12V:0.4A, +5V:0A
+24V:0.2A, +5V:0A
+5V:0.5A
+5V:0.5A
+5V:0.5A
+5V:0.5A
+5V:0.5A
Note
For LCD
For VFD
For VFD
For Printer
For maintenance (Front)
inside the Base unit
inside the Base unit
Preface - xi