2.2 Turning the Power Off
Make sure that all the work for the day is completed before turning off the power. If the unit is on, take the
following steps to shut it off.
Shut down by the software
Shut down the software (OS: Windows or applications software).
This should turn off the unit.
If shut down by the applications software, please follow the application software prompt.
Shut down by the power button
If the unit is still powered up after you have shut down the software, you can shut down
by the power button. This procedure may corrupt the programs and data on SSD. So, don't
use this procedure except in an emergency.
1. Slide up the power switch cover which is located on the left side of the monitor.
2. Press the power button for over 4 seconds to power down the POS computer.
When the power has been disconnected, wait at least 5 seconds before turning it
Note :
back on.
Turning the power off while the applications software is operating may corrupt the
programs and data on the SSD. Follow the applications software prompts when turning off
the power.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Page 10