Table of Contents
Advertisement
This chapter describes how to clean this product.
3.1 Cleaning the Product
The following cleaning operations must be performed every week.
Note :
Observe the following cautions when cleaning this product.
Switch off this product before cleaning.
Do not use a wet or chemically treated cloth or volatile chemicals such as paint thinner to clean the
equipment. Doing so may cause a malfunction.
3.1.1 Cleaning the Main Unit
Wipe the surface with a soft cloth such as gauze that has been moistened with neutral
detergent. Following show the ventilation holes of TeamPoS7000 model A240/A340. These
holes must be kept clean to prevent internal temperature to be hot.
Ventilation holes
Ventilation holes
3.1.2 Cleaning the Display
Wipe the surface with a soft cloth such as gauze that has been moistened with neutral
detergent.
THIS DOCUMENT CONTAINS CONFIDENTIAL INFORMATION, IS PROVIDED FOR FUJITSU CUSTOMER USE ONLY,
AND IS NOT TO BE SHARED WITH ANY THIRD PARTY WITHOUT FUJITSU'S PRIOR WRITTEN CONSENT.
Daily Maintenance
3
Page 22
Advertisement
Table of Contents
Troubleshooting
