C H A P T E R 1
I
NTRODUCTION
The PowerPass
a 2500-3000 VA Powerware
and allows you to:
: Replace or upgrade the UPS without losing power to your equipment
(see "Using Maintenance Bypass" on page 31).
: Provide surge protection if the UPS is not present.
: Provide extra surge protection when the UPS is present.
Safety Warnings
SAVE THESE INSTRUCTIONS. This manual contains important instructions that you
should follow during installation and maintenance of the PDM. Please read all
instructions before operating the equipment and save this manual for future reference.
:
There are NO USER SERVICEABLE PARTS inside the PDM. All repairs and
service should be performed by AUTHORIZED SERVICE PERSONNEL ONLY.
:
To reduce the risk of fire or electric shock, install this PDM in a temperature and
humidity controlled, indoor environment, free of conductive contaminants. Ambient
temperature must not exceed 40C (104F). Do not operate near water or
excessive humidity (95% max).
:
For PDM models with hardwired outputs, overcurrent protection for the output AC
circuit(s) is to be provided by others.
:
For PDM models with hardwired outputs, suitably rated disconnect switches for
the output AC circuit(s) are to be provided by others.
Powerware
9125 (2500–3000 VA) PowerPass
®
9
Distribution Module (PDM) is designed to operate with
9
9125 uninterruptible power system (UPS)
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
C A U T I O N
:
Distribution Module User's Guide
®
164201392 Rev B www.powerware.com
1