Panasonic KX-TDA0490 Getting Started page 33

Note
For more details about address translation programming, refer to "2.2.6 Address Translation
Table—GW Entry" and "2.2.7 Address Translation Table—DN2IP Entry" of the VoIP Gateway
Card Programming Guide.
3.2 Programming the VoIP Gateway Card in the Los Angeles Office
6. Click PREVIOUS.
7. Click 1.6.2 DN2IP Entry.
8. Do the following to configure the Los Angeles
extensions:
a.
In the Leading Number box, type 352 (PBX
code [35] + extension starting digit [2]).
b.
In the Remaining Number of Digits box, type
2 (2 digits to dial [00 to 99] following the leading
number).
c.
Click GW for GW No/Group No. Selection.
d.
In the GW No/Group No. box, type 0 (the
gateway entry for the card).
e.
Click ENTRY.
9. a.
Referring to step 8, complete the address
translation table as shown on the left.
b.
Click OK.
c.
Confirm your entry, and then click OK.
Getting Started 33