Notice When Programming the Card through an IP Network
When the card is put in actual operation on an IP network, you can access and program the card
through the network. However, if the network has a proxy server installed, you must apply appropriate
proxy settings to your PC. In this case, follow the steps below in substitution for step 5 above:
4.
a.
Click the Connections tab.
b.
Click Never dial a connection.
c.
Click LAN Settings.
5.
a.
Click to clear all check boxes.
b.
Click OK.
Your PC is now ready for programming through
direct access to the card.
5. Click Advanced.
3.1 Preparations
Getting Started
23