Programming The Pbx In The Los Angeles Office - Panasonic KX-TDA0490 Getting Started

16-channel voip gateway card
Hide thumbs Also See for KX-TDA0490:
Table of Contents

Advertisement

4.1 Programming the PBX in the Los Angeles Office

4.1
Programming the PBX in the Los Angeles
Office
For successful operation of a VoIP network using the VoIP Gateway Card as a QSIG network
interface, the PBX at each location in the network must be programmed appropriately. For a detailed
discussion of related features, refer to the Hybrid IP-PBX Feature Guide.
This section details the procedure to program the PBX in the Los Angeles office. After the PBX in the
Los Angeles office has been fully programmed, repeat the procedure for the PBX in the Chicago
office with the appropriate setting values.
Note
It is assumed that you have already installed the KX-TDA Maintenance Console (PC
programming software of the PBX) in your PC.
42
Getting Started
1. Start the KX-TDA Maintenance Console from the
Start menu.
2.
a.
Type the Installer Level Programmer Code
(default: INSTALLER).
b.
Click OK.
Click Connect → RS-232C or USB.
3.
a.
b.
In the next screen, type the system password
for installer (default: INSTALLER).
c.
Click OK.
The program menu appears.
4.
a.
Double-click Configuration.
b.
Double-click IP-GW Port.
Confirm that ports 1 through 8 are in service
(INS).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Kxtda0490 - 16 chnl voip gateway card

Table of Contents