Panasonic KX-TDA0490 Getting Started page 32

3.2 Programming the VoIP Gateway Card in the Los Angeles Office
32 Getting Started
3. Do the following to configure the gateway entry for
the Los Angeles office:
a.
In the GW No. box, type 0.
A gateway entry for the card will be created with
this numbering.
b.
In the Comment box, type Los Angeles (a
unique identifier of the card in the VoIP
network).
c.
In the IP Address box, type 200.45.11.35.
d.
In the Group No. box, type 0.
Note
Having the value 0 for Group No. means that
the card does not belong to any gateway group.
Grouping is useful when installing multiple
cards at one location. For details, refer to "2.2.6
Address Translation Table—GW Entry" of the
VoIP Gateway Card Programming Guide.
e.
Click ENTRY.
4. Do the following to configure the gateway entry for
the Chicago office:
a.
In the GW No. box, type 1.
b.
In the Comment box, type Chicago.
c.
In the IP Address box, type 199.176.64.41.
d.
In the Group No. box, type 0.
e.
Click ENTRY.
f.
Click OK.
5. Confirm your entry, and then click OK.
The gateway entries for the Los Angeles and
Chicago offices are now configured.