Call Transfer - To An Outside (Co) Line - Panasonic KX-TA308 User Manual

3.2 Telephone Features
Call Transfer — to an Outside (CO) Line
Allows you to transfer a received call to an external party.
PT
During a conversation
TRANSFER
Press Confirmation tone
and dial tone
TRANSFER.
• The current call is placed on hold.
Conditions
PT • If a CPC signal is sent to an outside (CO) line before the assigned time limit, a call
between two external parties will be disconnected.
PT • System programming is required to execute this feature.
PT • If a call between two external parties is established, an alarm tone is sent to both
parties fifteen seconds before the assigned time limit (default: 10 minutes). "Hold
Alarm/Hold Recall" is sent to the transferring extension fifty seconds before the time-
out.
PT • If you want to return to the held call, press the TRANSFER button or corresponding
CO or INTERCOM button before the destination party answers.
PT • If you want to join the conversation after transferring the call, press the corresponding
CO button. A conference call is established.
PT • To change the party where the call is transferred before hanging-up, press the CO
button whose indicator is flashing slowly to retrieve the call, then repeat the Call
Transfer procedure.
Programming References
• System Programming — Installation Manual
[205] Outside-to-Outside (CO-to-CO) Line Duration Time Limit
[420] Calling Party Control (CPC) Signal
[606] Call Transfer to an Outside (CO) Line
Feature References
Conference
Hold Alarm/Hold Recall (
CO
phone no.
line access code
Press a CO or enter Enter the phone number
a line access code where the call will be
(9 or 81 through 83). transferred.
See the Installation Manual.)
Wait for Announce.
Hang up or
an answer.
press
SP-PHONE.
• The call is transferred.
Telephone Features
C
3-43