Panasonic KX-TA308 User Manual page 150

P
Using Paging — Group: to a particular extension group
PT and SLT
During a conversation
TRANSFER
For a PT: Press TRANSFER.
For an SLT: Flash the hookswitch.
• The other party is placed on hold.
Announce.
Condition
SLT • If "Hold-3" is assigned in System Programming, you must dial "20" after flashing the
hookswitch.
Programming References
• System Programming — Installation Manual
[104] Hold Mode Selection
[600] Extension Group Assignment
3-96
Telephone Features
For a PT
For an SLT
Dial tone
Wait for an answer.
Confirmation tone
3.2 Telephone Features
3 3
paging group no.
Enter a paging group
Dial 33.
number (1 through 8).
Hang up or press
SP-PHONE.
• The held party and the paged extension are
connected and can start a conversation.
Confirmation tone