National Instruments PXI-1036DC User Manual page 40

10 MHz System Reference Clock (10 MHz REF)
Mechanical
Note 12.7 mm (0.50 in.) is added to height when feet are installed.
1
V(I/O) is connected to the +5 V DC power plane, so the same specifications apply to V(I/O) and +5 V.
© National Instruments Corporation
1
V(I/O) ................................................... +5 V
Backplane bare-board material .............. UL 94 V-0
Backplane connectors ............................ Conform to IEC 917 and
Maximum clock skew
between slots .......................................... 250 ps
Built-in 10 MHz clock
Accuracy ......................................... ±25 ppm (guaranteed over the
Overall dimensions (standard chassis)
Height.............................................. 177 mm (6.97 in.)
Width .............................................. 257.1 mm (10.12 in.)
Depth............................................... 212.8 mm (8.38 in.)
Weight............................................. 5 kg (11.0 lbs)
Chassis materials.................................... Sheet Aluminum,
Finish...................................................... Clear Chromate Conversion
IEC 1076-4-101, and are
UL 94 V-0 rated
operating temperature range)
Extruded Aluminum,
Cold Rolled Steel, Nylon
Coat on Aluminum
Electrodeposited Nickel Plate
Plate on Cold Rolled Steel
Polyester Urethane Powder Paint
A-11
Appendix A Specifications
NI PXI-1036/PXI-1036DC User Manual