Table of Contents
Advertisement
Chapter 3
Maintenance
Cleaning
Always disconnect the AC power cable (and the DC power cable, if you are
Caution
working with a PXI-1036DC chassis) before cleaning or servicing the chassis.
Interior Cleaning
Exterior Cleaning
Cautions
through the top vents. Use just enough moisture to dampen the cloth.
Do not wash the front- or rear-panel connectors or switches. Cover these components while
cleaning the chassis.
Do not use harsh chemical cleaning agents; they may damage the chassis. Avoid chemicals
that contain benzene, toluene, xylene, acetone, or similar solvents.
NI PXI-1036/PXI-1036DC User Manual
Cleaning procedures consist of exterior and interior cleaning of the chassis.
Refer to your module user documentation for information on cleaning
individual CompactPCI or PXI modules.
Use a dry, low-velocity stream of air to clean the interior of the chassis.
Use a soft-bristle brush for cleaning around components.
Avoid getting moisture inside the chassis during exterior cleaning, especially
Clean the exterior surfaces of the chassis with a dry lint-free cloth or a
soft-bristle brush. If any dirt remains, wipe with a cloth moistened in a mild
soap solution. Remove any soap residue by wiping with a cloth moistened
with clear water. Do not use abrasive compounds on any part of the chassis.
3-2
ni.com
Advertisement
Table of Contents
