Table of Contents
Advertisement
Chapter 2
Installation and Configuration
Installing PXI Modules
NI PXI-1036/PXI-1036DC User Manual
Figure 2-4 shows a PXI controller installed in the system controller slot of
a PXI-1036/PXI-1036DC chassis. You can place CompactPCI or PXI
modules in any other slot.
1
N I
P X
I - 1
0 3
6
3
1 PXI-1036/PXI-1036DC Chassis
2 Injector/Ejector Rail
Figure 2-4. NI PXI Controller Installed in a PXI-1036/PXI-1036DC Chassis
Complete the following steps to install a module.
1.
Make sure the power switch is in the Off (Standby) position.
2.
Install a module into a chassis slot by first placing the module card
edges into the front module guides (top and bottom), as shown in
Figure 2-5. Slide the module to the rear of the chassis, making sure that
the injector/ejector handle is pushed down as shown in Figure 2-3.
2
2-8
3 NI PXI Controller
ni.com
Advertisement
Table of Contents
