Removing Guards; Removing Brake Guards - Technogym Group Cycle D92 Technical Service Manual

11.3 REMOVING GUARDS

Remove the right guard first.
11.3.1 REMOVING BRAKE
GUARDS
Figure 122
2
Figure 123
Page 142
1
Technical Service Guide - Rev. 5.1
1. Remove the screw (1) with a 4 mm Allen
wrench.
2. Insert the Allen wrench in the hole and lift
the guard (2) by pulling outwards.
WARNING: do not use a screwdriver as,
in doing so, you will damage the guard
and gasket.
Document uncontrolled when printed
New Group Cycle (D92):