Mts Broadcast - Panasonic PV-V4525S Operating Instructions Manual

MTS Broadcast

Connection
Make the Audio/Video Connection as shown on page 3.
• You can use a TV connected to Stereo amp and speakers instead of a Stereo TV.
Receivable Broadcast Types
The following are possible audio broadcast types and on-screen displays.
The signal being received is indicated with a " " mark while the selected audio mode is indicated
with an arrow.
To display the broadcast signal being received,
➛ ➛ ➛ ➛ ➛ press DISPLAY*.
MTS Stereo and SAP broadcast
Multi-channel Television Sound Stereo (main language) and
Secondary Audio Program (sub language) broadcasts are being
received simultaneously. Select STEREO or SAP audio mode.
MTS Stereo broadcast
Multi-channel Television Sound Stereo broadcast.
Select STEREO audio mode.
• If stereo broadcast is weak and display flickers, select MONO
audio mode for possible better results.
SAP broadcast
Secondary Audio Program (sub language) broadcast.
Select SAP audio mode for the sub language.
MONO broadcast
Normal monaural sound broadcast.
Equipped with
MTS reproduction.
required for good stereo separation and audio
fidelity. ® is a registered trademark, and is
licensed by ® Technology Licensing.
TV
R
L
VHF/UHF
®
-TV Noise Reduction for true
®
-TV Noise Reduction is
VCR
AUDIO OUT
R
L
OUT TO TV
- 4 -
Stereo Amplifier
AUDIO IN
R
L
STOP 12 : 0 0AM
0 : 00 : 00
STEREO
SAP
MONO
STOP 12 : 0 0AM
0 : 00 : 00
STEREO
SAP
MONO
STOP 12 : 0 0AM
0 : 00 : 00
STEREO
SAP
MONO
STOP 12 : 0 0AM
0 : 00 : 00
STEREO
SAP
MONO
CH 02
SP
CH 02
SP
CH 02
SP
CH 02
SP