Table of Contents
Advertisement
to choc list before you begin
C] The VCR and other components are plugged in and turned on.
Connections
to Make
In from Antenna
Stereo AMP
or Receiver
Stereo
TV
When recording, you
may monitor in stereo,
by connecting the VCR
to either a stereo TV, or a mono sound TV
with an externa! stereo amp and speakers.
Receivable Broadcast Types
Push DISPLAY to display the broadcast
E)
signal currently being received.
eo
an
br
as
Multi-channel Television Sound Stereo
(main language) and Secondary Audio
Program (sub language) broadcasts are
being received simultaneously.
ree
The "STEREO" and "SAP" indicators
light in the Multi Function Display.
Select STEREO or SAP audio mode.
STOP
12:00AM
SPATIALIZER ON
STEREO
«4
MTS Stereo broadcast
STOP
12:00AM 2
Multi-channel Television Sound Stereo
SPATIALIZER ON
lights in the Multi Function Display.
MONG
Select STEREO audio mode.
* If a stereo broadcast is weak and the display
flickers, you may want to select the MONO
audio mode for better results.
DISPLAY
STOP
12:00AM
$
SAP broadcast
(STEREO) Eh ON
Secondary Audio Program (sub language)
| so
*
broadcast. The "SAP" indicator lights in the
Multi Function Display. Select SAP audio
mode for the sub language.
Equipped with dbx" -TV Noise Reduction
for true MTS reproduction. dbx? -TV
Noise Reduction is required for good
stereo separation and audio fidelity.
dbx? is a registered trademark, and is
licensed by dx? Technology Licensing.
26
STOP
12:00AM
n
SPATIALIZER
ON
eo
Normal monaura! sound broadcast.
OND
Advertisement
Table of Contents
